Cisco - QSFP28-sender-/mottakerenhet

100GbE - Ethernet 100GBase-SR1.2 - LC/UPC-multimodus - opp til 100 m - 855 nm / 908 nm - gjenfabrikert - for P/N: N9K-C93108-FX3-B8C, N9K-C9332D-GX2B, N9K-C9348D-GX2A, N9K-C9364D-GX2A, ST-FS4300-K9
Ikke på lager
Produsent Cisco
Artnr QSFP-100G-SR1.2-RF
  • Kontakt oss for pris Eks mva
Bookmark and Share
  • Informasjon
    • Lower capital expenditure by reusing of the duplex LC multimode fiber infrastructure
    • Reduce operational expenditure by seamlessly upgrading to 100Gbps rate from 10Gbps SR or 40Gbps BiDi
    • Future proof the network by providing connectivity to 400 Gbps rate
    • Reduce transmission errors with KP4 forward error correction (FEC) at 100Gbps data rate
    The Cisco QSFP-100G-SR1.2 is a parallel Quad Small Form-factor Pluggable (QSFP28) Bi-Direction optical module that supports 100 Gbps bit rates. The module integrates four host electrical data into two optical lanes over a 2-fiber duplex LC optical multi-mode fiber. The QSFP 100G SR1.2 BiDi operates 50Gb PAM4 channels, for a total aggregate bandwidth of 100Gb.

    PAM4 technology enables 50Gb data rate with signaling at 25Gbaud rates. Reversely, on the receiver side, the module de-multiplexes 2 sets of optical input signal and converts them to 4 channels of electrical data. An optical fiber ribbon cable with an LC connector can be plugged into the QSFP28 module. The QSFP 100G SR1.2 BiDi is compliant to IEEE802.3bm 100GBASE-SR4.

    The Cisco QSFP-100G-SR1.2 BiDi transceiver will operate with a Cisco QSFP-100G-SR1.2 BiDi for 100G connectivity. It can also connect to a Cisco 400 Gbps SR4.2 BiDi in a 4 x 100G breakout mode. The Cisco QSFP-100G-SR1.2 BiDi will not interoperate with the Cisco QSFP-40/100-SRBD.
  • Spesifikasjon
  • Nedlastbare filer